UNICAL AIR COMPRESSOR(BEIJING) CO., LTD.
Adsorption Dryer

Adsorption Dryer

Send Inquiry

The application of Adsorption Dryer can be noticed in process controlling work, filtration unit, climate controlling department and electromechanical arena. Known for its low operation cost, this system uses advanced desiccant bed with double layered structure for reducing regeneration of temperature. Usually, molecular sieve or activated alumina is used as its desiccant material. The latest design of its cooling section helps to prevent its heat generation level. The alarm system of this dryer is used for denoting its heating status, pressure level and temperature of its inlet section. We are a reliable exporter and manufacturer of superior grade Adsorption Dryer.

Adsorption dryer Product Features:

  • According to the requirements of the dew point to set the work cycle;
  • Regeneration gas can be precisely controlled;
  • Control system is reliable, anti-interference ability, long service life;
  • large load exhaust muffler, the noise reduced to a minimum;
  • Reasonable air distributor, to prevent the uneven distribution of air to prevent the phenomenon of red tower and adsorbent powder.
  • Dew point monitoring and control system can be added as required.

The main technical parameters:

  • Working pressure: 0.6 ~ 1.0MPa
  • Pressure dew point: -20 ℃ ~ -70 ℃
  • Inlet temperature: 0 ~ 45 ℃
  • Desiccant: Activated alumina or molecular sieves
  • Air inlet temperature: 0 ° C to 45 ° C
  • Pressure drop: ≤ 0.025 MPa
  • Air consumption: ≤ 14% (no heat), ≤ 7% (micro heat)
  • And then control: PIC electronic control
  • Installation: indoor no foundation
  • Power supply: 220V / 50Hz (no heat)
  • Micro heat: DE0150LH above 380V / 50Hz
  • The company's product research, improvement, design changes to retain the right, such as specifications change, anger without notice.

Model no

Air delivery (m3/min)

Power (V/Hz)

Power (HP)

Fan power (W)

Air pipe dia

Weight (kg)

LxWxH (mm)

HAD-0.7HTF

0.7

220/50

1/3

45

ZG1”

60

640*430*580

HAD-1HTF

1.2

220/50

1/3

90

ZG1”

80

760*430*700

HAD-2HTF

2.4

220/50

1

150

ZG1”

90

1000*600*860

HAD-3HTF

3.8

220/50

1.2

2x90

ZG1 1/2”

150

1200*700*1050

HAD-6HTF

6.5

220/50

2

2x150

ZG1 1/2”

250

1400*800*1130

HAD-10HTF

10.7

220/50

3.6

2x245

ZG2”

340

1400*800*1130

HAD-13HTF

13.5

220/50

3.8

2x245

ZG2”

340

1690*850*1658

HAD-15HTF

17

380/50

3.9

4x180

DN80

435

1795*900*1688

HAD-20HTF

23

380/50

4.2

2x180+145

DN80

480

1970*900*1708

HAD-25HTF

27

380/50

5.5

2x180+145

DN80

600

181*1010*1980

HAD-30HTF

33

380/50

6.5

4x145

DN80

700

1970*900*1780

HAD-40HTF

45

380/50

8.5

2x450+2x245

DN100

820

2610*1100*2018

HAD-50HTF

55

380/50

10.5

6x450

DN125

4900

2350*1190*2250